|The soldering tip of our company is enabling temperature control
stabilized by the design with the sufficient balance like each
|New Soldering tip TKH type|
|Plating is thickened, durability is raised, and heat is hard to be
taken, and flattery nature is the good soldering tip|
1.The heater sensor deep into the most front end of the soldering
tip, not only able to respond the accurate temperaterature rapidly,
but also reduce the temperature drop during soldering, increase the
use life of soldering iron
2.Heater power up to 70 ~ 100 watts:More heat compared to other
soldering tips in the market, more effectively provide enough heat
required by soldering point or area.
3.Clamp design to realize quick replacement of soldering tips,
meanwhile avoid position deviation during tips replacement.
4.Unique temperature control design can reduce the overshoot, at
the same time force the heating temperature function,guarantee the
soldering performance by using of low temperature.
Unique turning cylinder design makes iron set contact soldering
points gently, so as to decrease the percentage of solder ball
5.Tsutsumi soldering tip features with excellent tip design as to
to keep a stable temperature control
6.The durability is guaranteed by proper thicker plating, excellent
7.The temperature drop during the soldering becomes smaller, the
heat is hard to run off.
8.The tip's long life can save the production cost of consumables,
popular with endusers.
Website: http://www.soldering-iron-tips.com or